Heat Resistant Cement Based Tile Adhesive To Glue Ceramic For Floor
Pinbang Cement Based Tile Adhesive especially designed to glue
ceramic for floor interior application.
Pinbang Cement Based Tile Adhesive is water-redispersible white or gray powder that exhibits good
resistance to saponification composed of bonding agent, minerals,
synthetic resins and special additives, mixed with water can be
applied vertically without dripping for his high adhesion power and
Where to Use:
Pinbang Cement Based Tile Adhesive is usable on every type of floor ceramic tiles, clinker, stoneware,
ceramic, glass mosaic and low porosity material. It can be applied
for external and internal laying on both wall it is recommended for
gluing onto plasterboard and for over tapping onto ceramic floors,
marble and natural stone. It can be also used for the point gluing
of insulation materials as expanded polystyrene, glassy or rock
How to Use:
Pour 20 kg of Pinbang Cement Based Tile Adhesive into a container filled with about 5.5 L. of water and mix well
till obtaining a mixture free from clots, this mixture will be
workable for about 7 hours. Clean the support from dust and grease
substance, then Spread and cover all the surface. lay the tiles
impressing a strong pressure on them to assure the contact with the
adhesive for an optimum result. make sure that the spreaded
adhesive is always fresh and the surface is dry.
Mixed only with water the consumption limit is from 3 to 6 kg/m2
depending on the tile and the support surface.
Mixing Ratio (adhesive:water)
20 : 5.5
|Pull out resistance|
Pinbang Cement Based Tile Adhesive is filed in 20 kg paper bags. Product must be stored in a cool
place and protected against humidity. Storage time should not
exceed 12 months beginning with delivery.