Bathroom Cement Based Non-Slip Ceramic Tile Adhesive To Wall And
1, water- and frost-resistant.
2, easy to apply.
3, high stability.
4, for layer thickensses of 2 to 10 mm.
5, economical, cheaper.
Pinbang Cement Based Tile Adhesive for tile is a general purpose
grey cement based powder adhesive for fixing ceramic tiles to walls
and floors.the adhesive was designed for easy use, allowing up to 3
hours pot life after mixing.
When fixing lightweight or soft backed wall tiles the adhesive bed
thickness should not exceed 5mm.
It is suitable for fixing ceramic tiles, clinker brick, glass and
other mosaics to non-problematic wall surfaces (lime, lime-cement
and cement plasters/renders) and floor surfaces (concrete, cement
overlays). It is suitable for underfloor heating areas.
Field of Application:
1, Used to fix tiles with any water absorption.
2, Tiles fixed on external wall suggested size is less than 120cm2.
3, Tiles fixed on wall suggested weight is less than 20kg/cm2.
4, Fix tiles on internal or external walls and floors.
5, The adhesive sets and dries in 24 hours (approx) in normal
6, Suitable for wall and floor application.
7, For use with Ceramic, Quarry and Mosaic tiles.
8, Suitable for interior use including Kitchens, Bathrooms and
9, Can be used for exterior projects .
Typically one 20kg bag will cover 3.2 to 4 square metres( 4 - 5.2
1)Application temperature: 5°C~40°C.
2) Pot life: min 3 hours.
3)Water addition: 0.23 liter/kg powder (5.75 liter/ 25kg).
4) Adjust time: 15 min.
Min 3 hours
Resistance to Damp
Tensile Adhesive Strength (28 days)( JC/T547-2005)
Tensile Adhesive Strength Information:
Tensile Adhesive Strength
Tensile Adhesive Strength In Water
Tensile Adhesive Strength after Heat Aging
Tensile Adhesive Strength (open time 20 mins)
Tensile Adhesive Strength after Cycles of Freeze - Thaw
The substrate should be hard, sound, dry, flat, clean and durable.
1) Substrate should be flat ,hard, level, dry, and clean with
2) Clean the surface until free of grease, dust or any stains.
3) Old paint or plaster should be removed.
4) Substrate been repaired should be preserved at least 48 hours.
1) Ambient temperature: 5°C~40°C.
2) Avoid application if too hot or freezing weather.
3) Avoid application under direct sunlight and strong wind.
Store in cool and dry place, unopened product can be saved for one