White Strong Heat Resistant Tile Adhesive For Outdoor , General
PB-01 General Tile Glue
Strong adhesive strength, low stress, low dilatability, no bubble,
quick set, proper viscosity and easy to operate
Applied to indoor and outdoor wall paste of large-scale ceramic
tile, grassing stone, natural stone material
Smooth and firm, no dust, grease, release agents, batik material,
PB-01 General Tile Glue is a new type strong adhesive, applied to
indoor and outdoor wall paste of large-scale ceramic tile, grassing
stone, natural stone material, modifies epoxy glue with features of
strong adhesive strength, low stress, low dilatability, no bubble,
quick set, proper viscosity and easy operate, resistant of grind,
aging, cold-hot exchange.
The product is modified epoxy glue with features of strong adhesive
strength, low stress, low dilatability, no bubble, quick set,
proper viscosity and easy operate, resistant of grind, aging,
Scope of Application:
Widely used to combine, bond and repair of all kinds of stones,
ceramic tile, concrete, metal, etc, like plate combining,
craftworks processing, stone surface cracks repairing.
1. Remove the oil, dirty from the surface and keep clear, dry.
2. Mix the glue by rate of A: B as 1: 1 thoroughly. Apply the glue
by scraper into the position to be connected, use fixing tool and
press together. After leaving 24 hours at normal temperature, go on
next processing. Heat the stone and spread glue to 50℃~6℃ if in
winter, then go on next step after 2~3 hours cooling.
3. Add color paste, paint to adjust the glue color per the stone.
The qty of color paste is 1~2% of total glue; Paint is 10~20%.
4. Wipe off the additional glue by cloth dipped with alcohol or
acet before solidified.
Storage and Packing:
1. With one year life time in cool, ventilated and dry condition.
Can go on use if test valid after the validity period.
2. Noninflammable, non-poisonous after solidify and can transport
by mailing, express.
3. Packing size: 20kg/bag.
1. Operating temperature should be over 5℃. In winter, heat the
plate to speed solidify and improve adhesive.
2. Do not spread glue over quantity. Make the operating temperature
become higher, shorter the usable time and solidifying time.
3. Do not mix using of the tools for part A and B; Do not return
remained glue into the bottle.
4. Do not move the plate before completely solidify.
5. Add 3% no water ether or acetone to dilute the glue if the
viscosity is too large. Also could heat the glue in the hot water
of 40℃~60℃ to lower the viscosity.
6. Do not mix cap of the part A and B. Tighten the caps after
usage. Do not swallow.
7. Make a trial usage in advance to avoid mistake according to the
different physical and chemical property of the stone.