Ceramic Floor High Temperature Tile Adhesive Flexible / Swimming
Pool Tile Glue
1, this product is mainly used for cement-based wall and ceramic
tile adhesion. Improve the flexibility and deformability of
2, effectively reduce ceramic tile falls off and empty drum which
caused by cement shrinking.
3, enhance the adhesive performance of ceramic tile adhesive mortar
after water resistant.
4, this model applies ceramic tile adhesive mortar.
5, The tile adhesive is mainly comprised of cement that makes it
suitable for the fixing of tiles on the external floor and internal
walls. These are also well suited for fixing most of the natural
1, This product is polymer modified cement tile adhesive, and the
performance is better than general cement mortar. High bond
strength and slump resistance.
2, Sliding-resistance, dispense with soaking bricks,thin
construction layers ,high stickiness,no hollowness,environment
3, Long repositioning allowing more time to move tiles/natural
stone into correct position.
4, Stronger adhesive force compared with Portland cement.
5, Adhere tile in thin layer, reduce burden of wall.
6, Excellent water-resistan, suitable for swimming pools and other
1, Waterproof, thin-bed cement-based adhesive for the fixing of
ceramic floor, wall tiles and mosaics.
2, It has been specially formulated for use over sand/cement
render, is non toxic, easy to apply and no wetting of tiles is
required when fixing.It is considerably lighter in comparison with
conventional sand/cement mortar and the final weight of the
finished of the finished installation is proportionately
reduced.just add water and stir mix.
3, apply to wall or floor by trowel then fix tile on itable to use
on external wall non slip type with long open time for easy
4, High bond strength tile adhesive for ceramic tiles, glazed
tiles, marble and granite, ideal for tile-on-tile application, for
bathrooms, swimming pools.
1, All the surface should be strong/ dry/ clean, no shake/ oil
stain/ wax stain/ concrete curing agent and other loose things.
2, If the surface is covered with paint, it should be hacked and at
least exposed 80%.
3, New concrete surface should be cured for 28 days at least. Then
4, New plaster base should be cured for 7 days at least. Then pave
5, You can use industrial detergent or degreasing dirt agent to
clean the old concrete or plaster surface. Then use high pressure
tap to clean up. It can be paved tile after airing 24h.
6, Clean the residue of concrete surface, especially the residual
mold release of the slant concrete surface.
7, Before construction, the surface need to be wetted, if the
surface is water absorption strong or in high temperature/dry
|High temperature resistance|
Keep in a cool and dry place, unopened powder valid for one year.