Pinbang Outdoor Tile adhesives , modified polymer adhesive
specially designed for various mosaics and various small-sized
1, Good thixotropy and easy to apply; pasting tiles and filling
grouts can be finished at a time.
2, Excellent water resistance and anti-ageing.
3, Innocuous, and friendly to environment.
1, The surface should be dry, clean, and free from oil stain and
other loose substance.
2, The surface should have a higher strength, with a basic evenness
Adjust time (min)
Open time (min)
Surface drying time
1, Mix the adhesive power with water at a ratio of 20: (6.4~7.2) to
be lump-free mixture; then let it stand for 3-5 minutes, restir
again. The product is now ready to use.
2) Use a notched trowel to apply the adhesive onto the substrate,
with an area of 1m2 each time, then trowel a thin-layer adhesive on
the back of tiles and fill up adhesive to the grout joints. then
paste tiles onto the substrate press and make it firm.
Normal shear strength
Water resistance shear strength
|Heat treatment resistance shear strength|
|Freezing-thawing resistance shear strength|
1, Before application, check the state of the substrate.
2, This product had better be used at 5℃-40℃.
3, In summer, if the temperature of the substrate is too high ≥40℃),damp it with water, in case of too fast water shortage of the
adhesive /on the substrate and affecting quality.
4, Do not mix the cured adhesive with water and reuse it .
5, About 2-3 hours after application, use a piece of wet cloth done
and sponge clear the surface of the tiles.
6, Following applications should be done more than 24 hours after
Shelf life is minimum 1 year when stored in covered and dry