Strong Bonding Outdoor Tile Adhesive Waterproof , Floor And Wall
1, Outdoor Tile Adhesive.
2, Strong Bonding.
3, Stable Performance.
1, Environment-friendly, non-toxic.
2, High bonding strength and durability.
3, Convenience in handling, mixing and application.
4, Strong anti-cracking and waterproof.
The substrate surface should be firm, dry and clean, no grease, no
wax, and other loose materials.
Wall tile ＞60×60cm
new tiles on old tiles
Mixing Ratio (power:water)
|electrical blender, notched scraper (3×3mm, 4×4mm, 6×6mm,
8×8mm,10×10mm), horizontal ruler etc.|
1, Using a tooth scraper to scrap the adhesive onto the surface
evenly, control within 1㎡.
2, Push the ceramic tile or heavy type ceramic tile above it
3, For the tile or stone material with deep ditch, not only scrape
the surface, but also the backside of the tile or stone.
1, Never mix the dry slurry with water for second use.
2, For the light wall pasting large-sized decorative boards, like
gypsum board and Eterpan, confirming the wall firmness before
3, For the painting surface, make sure the initial bond strength
and have no cavitation.
4, Operating in the situation under 5℃~40℃.
5, Clean the surface by slightly wet sponge or cloth before it
6, Leave 1.5mm joint space between two tiles, suggesting PB-MC
color anti-moldy gap filler.
Keep in a cool and dry place, unopened powder valid for one year.