Two Component Epoxy Interior Wall Putty High Strength Harmless
PB-08 Two-component Outdoor Skim Coat, double-component, normal
setting cementitious mortar for smoothing concrete and cement-based
1.It has good two-way compatibility, strong cohesive force with
base plane and paint primer.
2.It is ready-mix product, has uniform and stable performance, can
be used by opening and adding water and latex, convenient and
3.It has good thixotropy, even and smooth, smooth construction,
could improve the construction efficiency.
4.It has excellent crack resistance and water resistance. Eliminate
the cracking, sand buckle and peeling phenomenon.
5.The leveling facing is exquisite, smooth; reduce the amount of
painting and the comprehensive cost.
6.It is non-toxic and harmless, no radiation, no irritating smell.
It does not contain flammable erosion substances, convenient and
safe. The good weather resistance ensures the shelf.
7.Use the Renovation of exterior wall leveling putty, there is base
plane without output, this reduce the cost and improve the
1. PB-08 powder paint is a powdered, high-strength,
double-component cement-based mortar with selected fine aggregates,
special additives and synthetic polymers.
2. When mixed with water, PB-08 wall coating forms a soft paste
that is easy to apply even on vertical surfaces in thicknesses up
to 1 to 2 mm in a single coat.
3. Because of its high synthetic resin content, PB-08 Skim Coat
bonds extremely well to all concrete surfaces and forms a compact,
strongly adhesive layer when hardened.
Where to Use:
1. Protection and smoothing of concrete surfaces.
2. Smoothing surface imperfections in concrete surfaces before
3. Smoothing of concrete repairs.
4. Smoothing irregular surfaces of cement-based renders that have
good mechanical strength.
Store in cool and dry place, for the liquid group should stay in
the environment above 5 ℃, unopened product can be saved for one
Surface drying time(Hr)
standard state (Mpa)
Freeze-thaw cycle (Mpa)
Alkali resistance (48hr)
Water resistance (96hr)
Using level (kg/ m²)