2mm Cement Based Interior Wall Putty For Skim Coating Walls
1. PB-09 Burnishing Skim Coat is a two-component, high-strength,
cement-based mortar with fine-grained selected aggregates, special
admixtures and synthetic polymers in water dispersion.
2. When the two components (component A powder and component B
liquid) are mixed together, an easy-spread mix is obtained which
may be applied manually on vertical surfaces at a thickness of up
to 2 mm per layer.
Features and Benefits:
1. Crackless application.
2. Mixes easily with potable water.
3. High-ductility smoothing and leveling layer on concrete
4. High bonding strength
5. Impermeable to water and aggressive gases present in the
1, Using spatula to scraping mixed polishing lacquer putty onto the
surface (requiring one or two times).
2, After 8h using sand paper for polishing.
a, Using appropriate scraper to scrap the lacquer putty on the
b, Mixing the PB-09 with water into paste, electric mixer can get
better effect. put it aside for a few minutes and then a little
stirring to strengthen the hardness.
1~1.2kg/m² /mm of thickness, depending on thickness and condition
of base coat.
Few dosages for the even surface
Store in cool and dry place, unopened product can be saved for one
About 1.8~2.5kg/㎡,according to the smoothness of the surface
1, status: powder, evenly without caking
2,operation: no scratching barrier
3, dry time: under 4h
4, water resistance(48h): normal
5, alkaline resistance(24h): normal
6, shear strength under standard pressure: ＞1.2MPa
7, shear strength after water resistance: ＞0.9MPa
8, shear strength in freeze-thaw: ＞0.9MPa