Flexible Polymer Interior Wall Putty Eco Friendly For Bathroom
1, Indoor skim coat is a kind of brand-new paint rendering
material. It is added with flexible polymer and hydrophobic
2, It is used to level the interior wall surface before painting.
Water, acid(mild), alkali(mild), and vermin resistance.
3, Ensure longer lasting performance in a variety of application.
1, The substrate should be firm, clean and free from grease, wax,
oil and any loose or other material which may inhibit adhesion of
the skim coat.
2, Add water at 37%~40% into a clean container, then add powder
material, mix them with an electrical mixer, until equal, lump-free
mixture is achieved. Allow it to stand for 5~10 min, then re-stir,
at this moment, you can use it.
3, Use a correct trowel to apply the adhesive skim coat onto the
substrate; Twice or three times is the optimal; The second
application is followed until the first is dry completely almost
(6~8 hours or more).
4, 24 hours after the last application, sanding with fine sand
paper shall be conducted; When sanding, level the trowel trace
5, 5~7 days later, apply finish paint; If earlier application,
needed, alkali-resistant primer shall be used.
6, Do not add water into the cured skim coat and reuse it.
PB-10 indoor skim coat complies with standard of n-type of jg/t
Store in cool and dry place, unopened product can be saved for one
Depending on the evenness of the substrate
State Lump-free equal in the powder agent
Surface Drying Time 4 hours
Water Resistance Excellent
Alkali Resistance Excellent
Normal 14-day Bonding Strength ≥ 0.7MPa
Water Resistance Bonding Strength ≥ 0.5MPa
Surface PH Value (14days) 8 ~9