Blue Mould Resistant Swimming Pool Tile Grout For Exterior
1, Good bond strength and anti-infiltration function, can improve
the waterproofing function of the surface at whole, suitable for
the gap-filling of cement tiles or stone materials.
2, Various color perfect the decoration of the surface.
3, Anti-moldy, keep the surface tidy and clean.
The gap should be clean, no littering or water, for the high
water-absorption ceramic tiles, wet the gap first.
Color: White, yellow, red, green, blue and others, totally 16 kinds.
Average amount for each square:
25×(brick's length+ brick's widen)×height of the gap×widen of the
13.5×brick's length×brick's widen
= kg/ ㎡(the above units: mm)
This formula may be lager for the tiny gap, gap above 3mm can get
the right result.
1, Mix ratio: for thick gap: 25kg powder + 6~7kg water, for slit
gap: 25kg powder +8.5~9.5kg water.
2, Pouring water into the barrel, then add powder, using an
electric mixer to make uniform paste, put it aside for 5~10 minutes
and then a little stirring to gain the better effect..
a, Sealing with a rubber knife, filling the crack with the mixed
gap filler, press it into the tile along the diagonal cracks, and
then scrape the extra.
b, Let air dry for 30~40 minutes and then thoroughly clean the tile
with slight damp sponge or cloth.
c, More than 24 hours after the grout to dry, the remaining stains
on the tile can be cleaned by water or special tile cleaner.
1, Never use acid cleaner to clean the finished-gap-filling tile.
2, Never operate under raining.
3, This product requiring the temperature between 5℃~40℃.
4, This product is suitable for the gaps between 3~18mm; for the
1.5~3mm gaps, suggesting our slit gap grout; for the gaps above
18mm, welcome to customize the order by telephone.
5, When operate at large-scale area, it's better to leave stretch
gap; do the first maintenance after 24h, 48h later for the second
time. No need to maintain if the condition is wet.
6, For the permeable or unglazed tiles, our company proposed to use
pointing method to avoid contamination of the surface.
Store in cool and dry place, unopened product can be saved for one