Damp Proof Exterior Wall Putty Skim Coat Waterproof For House
1, Strong cohesive force, can be well attached to the wall and
2, Good anti-crack function.
3, Good damp-proof function and ventilation can keep the wall and
the painting dry.
4, Texture of nature, ensure the decorative paint effects can be
1, The substrate surface should be firm, dry and clean, no grease,
no wax, and other loose materials.
2, New plaster surface should maintenance about twelve days before
inserting the lacquer putty, do not use cement paste for
3, If the wall is too dry, wet the wall before operation till there
is no obvious water on the surface.
1, The ratio: PB-07: water=20kg :about 5.0~6.0 L.
2, Pouring the water into the stirring barrel, adding the powder
slowly, stirring them into particle paste with no powder no
3, Using inserting tools to batch, after 4~6h of the first insert
can make the second time.
4, Polishing the skim coat layer, control the thickness between
5, After finishing the skim coat layer 7 days can coat other
6, Nursing the skim coat layer by water after it dries 24~48h, keep
this for 2~3 days.
a, Mixing the PB-07 with water into paste, electric mixer can get
better effect. put it aside for a few minutes and then a little
stirring to strengthen the hardness.
b, Using appropriate scraper to scrap the skim coat on the surface.
Concrete polymer, hydrophobic
Store in cool and dry place, unopened product can be saved for one
Depending on the evenness of the substrate
Appearance Grey or white powder
Drying time Approx.3hr.
Water Resistance Excellent
Alkali Resistance Excellent
Normal 14-day Bonding Strength ≥ 0.7MPa
Water Resistance Bonding Strength ≥ 0.5MPa
Surface PH Value (14days) 8 ~9