Green Exterior Wall Putty Skim Coat With Cement Based Mortar
1. PB-08 Retread Skim Coat is high-strength, cement-based mortar
with fine-grained selected aggregates, special admixtures and
synthetic polymers in water dispersion.
2. This product is specially developed for the high-level external
wall putty in order to apply the high-level wall putty market,
provides a flat base surface and has strong adhesive force to the
Features and Benefits:
1, Crackless application.
2, Mixes easily with potable water.
3, High-ductility smoothing and leveling layer on concrete
4, High bonding strength.
5, Impermeable to water and aggressive gases present in the
1, The ratio: powder: water: additive: 8: (2~2.8): 1.
2, The substrate surface should be firm, dry and clean, no grease,
no wax, and other loose materials.
3, If the wall is too dry, wet the wall before operation till there
is no obvious water on the surface.
4, Pouring the water into the stirring barrel, adding the powder
slowly, stirring them into particle paste with no powder no
deposition, using inserting tools to batch, after 4~6h of the first
insert can make the second time, polishing the lacquer putty layer,
control the thickness between 0.8~1.5mm.
5, During the insert process, pay attention to the even and flaws.
6, When finishing the putty, according to the weather to polish
within 1~2 days.
7, After 7 days of the inserting putty, can paint other coatings,
for the alkali resisting primer the time can shorten.
1.0~1.5 kg/m² per mm of thickness.
Few dosages for the even surface.
Tensile strength resistance to temperature
Compression and shear bond strength
Tensile strength resistance to freezing and thawing
Waterproofing pressure strength
Resistance to artificial aging strength(1000h)
No peeling, no crack, no peeling
Store in cool and dry place, unopened product can be saved for one