Swimming Pool Exterior Wall Putty / Lacquer Putty Eco Friendly
PB-09 Polishing Skim Coat is a thin coating putty, owning strong
anti-crack function, can be inserted on other outer wall putty
directly, and make the surface smooth and closed, reducing the
amount of base coat or painting (especially the F-C paint).
1, Water single putty: white paste, can be used directly, contains
water acrylic mainly.
2, Oily two-component putty: includes main agent and curing agent
and the ratio is 20: 1, mixing them before using.
Note: the mixed putty should be used up within 4h.
1, The substrate surface should be stand, dry and clean, no grease,
no curing agent, no release agent, no inseting marks.
2, Flatness ＜2mm
1, Using a trowel to scrape the mixed polishing skim coat on the
surface (requiring one or two times).
2, Polishing with a piece of sandpaper 8h later.
a, Using a appropriate scraper to scrape the skim coat on the
b, Mixing the PB-09 with water into paste, a electric mixer can get
better effect, put it aside for a few minutes and then a little
stirring to strengthen the hardness.
Normal Amount: About 0.15~0.2kg/㎡.
1, Make sure the smooth and vertical rate of the surface before
2, Never mix the dry slurry with water for second use.
3, The mixed skim coat should be used up within 3h.
4, Polishing within 1~2 days according to the weather.
5, For the base surface polished by cement paste, suggesting the PB
external repair skim coat.
6, Just polish the marks. Not overly polish so as not to affect the
strength of the putty.
Store in cool and dry place, unopened product can be saved for one