Flexible Waterproofing Slurry K11 For Bathroom / Eco Friendly
1, PB-K11 General Waterproof Slurry can be used on the wet surface of the basic construction directly.
2, Strong bond with the substrate, the active ingredient in the
slurry can penetrate the pores and micro-cracks in the cement-based
surface, and produce a chemical reaction with the substrate to form
a crystal-integrated waterproof layer.
3, Can follow up directly after the slurry dried without a mortar
4, Can be the waterproof both for the positive and back sides. Good
ventilation and keep the surface dry.
5, Excellent aging resistance. Non-toxic, harmless, and
1, The waterproof for indoor and outdoor concrete structure,
precast concrete structure, mortar, brick wall and so on.
2, Waterproofing projects of hydraulic projects, power stations,
factory warehouses, food storehouses, tunnels, kitchens,
underground car parks, drainage and walls, floors, swimming pools,
water tank and other mortar based layer.
3, Can be used as the basic layer for K11 High Flexible
1, The surface should be stable, clean, smooth, no dust, no oil, no
shedding, and other detrital materials.
2, The obvious pores and holes must be silted up with the cement
mortar, the sharp edges should be wiped out. Recommend to mix PB-03
cement mortar additive when repairing.
3,If the surface is dry, moist the surface with clean water till
there is no clear water before operation.
1, Pouring the additives into the container, then slowly pour the
powder and stir them into a uniform, no-powder and no-deposit
2, Using a brush or roller to brush the slurry on the surface
directly with a horizontal and vertical direction to avoid leaking
3, Mixed ratio: 25kg powder+9kg additive.
4, During the operation, keep intermittent stir to avoid
For water proofing, the brushing thickness is about 1.2~1.5mm, and
is about 15~20㎡/flat.
(Note: the above amount is based on the smooth degree of the
1, Do other covers after the waterproof layer totally dry.
2, For a better effect, do not operate under 5℃ or particularly
damp and unventilated situation, if necessary, use fans to dry.
3, Never mix the dry slurry with water for second use.
Store in cool and dry place, unopened product can be saved for one
25kg powder+9kg additive