Grey Non-slip Ceramic Wall Tile Glue Thixotropic Single Component
|Component||Portland cement, non-reactive aggregate, graded sand and other
|Application||Applied to indoor and outdoor wall paste of large-scale ceramic
tile, grassing stone, natural stone material|
|Dry Time||About 24h|
|Max. aggregate size||1.0 mm|
|Water demand||Approx. 25-28% or 5-5.6 L/20 kg bag|
1.4 kg/L (dry)
1.4 kg/L (wet) for using 26% water demand
|Pot life||Approx. 1 hour|
Pinbang Fast Fix is a cementitious, water resistant, and single
component tile adhesive. It is designed simply to mix with water to
give strong, non-slip, and highly workable adhesive mortar for both
interior and exterior applications with setting time of 6 hours.
1, Fast setting tile adhesive for renovation purpose.
2, Tiling for tile size not greater than 600mm×300mm.
3, Interior and exterior wall tiling on renders or cement mortar.
4, Interior and exterior wall tiling on concrete for small size
ceramic tile. The concrete should be sufficiently aged or cured.
5, Floor tiling for small and medium sized tiles.
6, Tiling on gypsum board, cement board, dry wall, gypsum support
and anhydrite support as long as the substrate is recommended
primed with Pinbang Moisture Sealer for wall or Pinbang Primer for
7, Tiling on cementitious waterproofing material such as Pinbang
Features and Benefits:
1, Formulated to comply with European Norm and Chinese Standard.
2, Fast setting – allow tiling and grouting in one day.
3, High early strength and the tile can allow light traffic in one
4, Strong adhesion under exterior weather condition.
5, Single component: fixed mixing proportion, ensure the quality of
6, Adjustable within 10 minutes.
8, Thixotropic and easy to trowel, good workability.
9, Shrinkage compensated: reduce the shrinkage cracks.
1. Construction tools: Leveling instrument, dentiform drawknife
(3×3mm, 4×4mm, 6×6mm, 8× 8mm, 10×10mm), tile generator, motor
stirrer, big drum, cross-colloidal.
2. Stir and mix: Mix tile adhesive and water as 20: (5~6.5) stirs
completely and waiting for 5 minutes, stir again.
3. Layup construction: Scrape the glue paste evenly on base plane
with dentiform drawknife, the area should be about 1 m ² each time,
then knead and press on the base plane. The model of the dentiform
drawknife depends on the size of the tiles.
1. The vertical and smoothness of the substrate must be confirmed
2. The product is suitable for construction in the 5℃~40℃.
3. Don't use the dried paste by reading water.
4. If the base plane is uneven or the back of tile is not smooth,
wiping the paste on the back of brick in order to ensure it full
with paste to avoid hollowing.
Original tensile adhesive strength(Mpa)
Tensile adhesive strength after water(Mpa)
Tensile adhesive strength after thermal aging(Mpa)
Tensile adhesive strength after thawing cycle(Mpa)
Tensile adhesive strength after standing for 20 min(Mpa)
Storage and Packing:
Pinbang Fast Fix is delivered in 20kg bag. Storage life is 12
months if the product is kept in a dry place.
Health and Safety:
1, Recommend to wear NIOSH approved or equivalent particulate face
mask when mixing the material.
2, Material contains cement, which may produce an allergic effect.
3, Keep out of reach of children.
4, Material may cause irritation to eyes and skin. In case of
contact with eyes, rinse immediately with plenty of water and seek
medical assistance. After contact with skin, wash immediately with
plenty of soap and water.