Renovation Ceramic Wall Tile Adhesive Professional For Walls and
|Component||Portland cement, non-reactive aggregate, graded sand and other
|Max. aggregate size||1.0 mm|
|Water demand||Approx. 25-28% or 5-5.6 L/20 kg bag|
1.4 kg/L (dry)
1.4 kg/L (wet) for using 26% water demand
|Pot life||Approx. 1 hour|
|Adjust Time||about 15min|
|Cool Time||about 10min|
Pinbang Fast Fix is a high performance, professional formula adhesive with the high
bond strengths required for all kinds of tiles and stones
installations. Suited for ceramic, mosaic, quarry, pavers, gauged
slate, porcelain and gauged stone tile. Pinbang Fast Fix provides maximum resistance to intermittent water exposure.
1, Particularly strong bonding power, applied to indoor and outdoor
wall paste of large-sized ceramic tile, grassing stone and natural
2, Strong adhesion under exterior weather condition..
3, Can be used on the low water-absorption surface, like pasting
new ceramic tile above the old ones, and can be used on the firm
4, Excellent flexibility, can bear the stretch of the bonding layer
that caused by temperature difference.
5, Good anti-infiltration function, Non-slip.
6, No need to wet the brick wall, effectively improve the
7, Shrinkage compensated: reduce the shrinkage cracks.
Substrate must be free from grease, mould oil, rust, rusty metal,
wood peels, paints, plastics, loose particles, contamination on any
traces of foreign materials affecting the adhesion of Pinbang Fast
1, Pinbang Fast Fix can be applied at least 7 days after the
application of render.
2, Before application, dampen the surface with clean water and
allow excess water to drain away.
3, Mix a bag of dry mix powder (20kg) with approx. 5-5.6 L of water
by using an electric mixer.
4, Stir the mixture thoroughly for 5-7 minutes to a creamy paste
without lumps. Then let the mixture stand for 10 minutes for the
additives to dissolve, and then mix again before use.
5, Apply Pinbang Fast Fix by using a notched trowel directly onto
substrate, over which tiling can be achieved within 30 minutes
under normal temperature and humidity condition. Unfavourable
weather conditions such as strong sunshine, low humidity, high wind
speed, or highly water-absorbing substrates will reduce the open
time of tile adhesive.
6, When the surface of tile adhesive is dried, do not use water to
wet the surface. It will form a
very weak and non-adhesive layer.
7, It is recommended to use Pinbang Tile Grout for grouting 4-6
hours after tiling.
8, Can be used for the old ceramic tile retreading.
(Details of the procedure please refer to our Method Statement.)
1, Never mix the dry slurry with water for second use.
2, For the light wall pasting large-sized decorative boards, like
gypsum board and Eterpan, confirming the wall firmness before
3, For the painting surface, make sure the initial bond strength
and have no cavitation.
4, Operating in the situation under 5℃~40℃.
5, Clean the surface by slightly wet sponge or cloth before it
6, Leave 1.5mm joint space between two tiles, suggesting MB-MC
color anti-moldy gap filler.
Thickness and Theoretical Consumption:
Consumption (kg/m2) = Total thickness of Pinbang Fast Fix (mm)×Coverage (kg/m2/mm)
Pinbang Fast Fix is delivered in 20kg bag. Storage life is 12
months if the product is kept in a dry place.