Floor Fix Marble Ceramic Floor Tile Adhesive For Interior /
Exterior Floor Tiling
|Color||Grey or White|
|Component||Portland Cement, Non-reactive Aggregate, Graded Sand and other
|Max. Aggregate Size||2.0 mm|
Grey: approx. 19-21% or 3.8-4.2 L/20kg bag
White: approx. 22-24% or4.4-4.8 L/20kg bag
1.5 kg/L (dry) for Grey
1.7 kg/L (wet) for Grey using 20% water demand
1.4 kg/L (dry) for White
1.7 kg/L (wet) for White using 23% water demand
|Pot Life||Approx. 3 hours|
|Coverage||Grey and White: approx. 1.4 kg/m2/mm|
Approx. 14 kg/m2 for thickness of 10 mm
Approx. 2.9 m2 /40 kg bag for thickness of 10 mm
Pinbang Floor Fix, Thick Bed Stone and Marble Floor Fixing Mortar
complying with C2 class of EN 12004 and ANSI A 118.4
Pinbang Floor Fix is a highly water resistance adhesive mortar
designed for floor stone and marble fixing. It is a thick bed
adhesive mortar with application thickness of 5-10mm and high
compressive strength. For the white tile adhesive, it is suitable
for tiling of light color marble or granite tiles without affecting
the color of tiles. Notched trowel with higher ridges or buttering
onto backface method is suitable to apply.
1, Floor tiling with thickness 5-10mm.
2, Interior and exterior floor tiling for large size stone and
3, Tiling on cementitious waterproofing material such as Pinbang
Features and Benefits:
1, Formulated to comply with European Norm, Chinese Standard and
2, Strong adhesion under exterior weather condition.
3, High compressive strength.
4, Single component: fixed mixing proportion, ensure the quality of
5, Thixotropic and easy to trowel, good workability
6, High water retention and shrinkage compensated
Adhesion to Concrete
EN 1348 : 2007
JC/T 547 : 2004
Initial adhesion strength
Adhesion strength after heat aging
Adhesion strength after water immersion
Adhesion strength after freeze-thaw cycles
> 1.5 N/mm2
> 1 N/mm2
> 1 N/mm2
> 1 N/mm2
EN 1346 : 2007
20 mins with > 1 N/mm2
Strength 28 days
JC/T 547 : 1994
ANSI A 118.4
Unless specified, all technical data are average values and refer
to 28 days curing time
European Norm : EN 12004 : 2007 Class C2
Chinese Standard : JC/T 547 : 1994
American Standard : ANSI A118.4 : 1999
1, Substrate Preparations:
Substrate must be free from grease, mould oil, rust, rusty metal,
wood peels, paints, plastics, loose particles, contamination on any
traces of foreign materials affecting the adhesion of Pinbang Floor
1) Pinbang Floor Fix can be applied at least 7 days after the
application of screed.
2) Before application, dampen the surface with clean water and
allow excess water to drain away.
3) Mix a bag of dry mix powder (20kg) with appropriate amount of
water by using an electric mixer.
4) For Pinbang Floor Fix Grey, add approx. 3.8-4.2 L (19-21%) of
water; for Pinbang Floor Fix White, add 4.4-4.8 L (22-24%) of
5) Stir the mixture thoroughly for 5-7 minutes to a creamy paste
without lumps by using common portable electric mixer. Then let the
mixture stand for 10 minutes for the additives to dissolve, and
then mix again before use.
6) Apply Pinbang Floor Fix directly with notched trowel onto
substrate over an area that can be tiled within 20 minutes in
normal temperature and humidity condition. Unfavourable weather
such as strong sunshine, low humidity, high wind speed, or highly
absorbing substrate will decrease the open time to a few minutes.
7) When the surface of tile adhesive is dried, do not use water to
wet the surface. It will form a very weak and non-adhesive layer.
(Details of the procedure please refer to our Method Statement.)
Natural air curing for Pinbang Floor Fix is enough.
Storage and Packing:
Pinbang Floor Fix is delivered in 20kg bag. Storage life is 12
months if the product is kept in a dry place.
Health and Safety:
1, Recommend to wear NIOSH approved or equivalent particulate face
mask when mixing the material.
2, Material contains cement, which may produce an allergic effect.
3, Keep out of reach of children.
4, Materials may cause irritation to eyes and skin. In case of
contact with eyes, rinse immediately with plenty of water and seek
medical assistance. After contact with skin, wash immediately with
plenty of soap and water.